How To Tether A Shock Doctor Mouthguard?

To tether a Shock Doctor Mouthguard, secure the tether cord inside the guard and connect it to the helmet straps.

How To Tether A Shock Doctor Mouthguard?

Tethering your Shock Doctor Mouthguard ensures it will never slip out of your mouth during play and provide you with optimal protection. With just a few simple steps, you can learn how to properly tether your Shock Doctor Mouthguard to the straps of your helmet.

Start by inserting your Shock Doctor Mouthguard into hot tap water for several seconds. This softens the material to make it more pliable and easier to mold into the correct shape for a perfect fit. Once molded, remove it from the water, rinse with cold water and dry completely before attaching it to the straps of your helmet.

Knowing how tight or loose your mouthguard should be is key when tethering it securely to your helmets straps. Make sure the guard fits comfortably without being too tight or loose while still staying firmly in place adjust accordingly if necessary. Attach two tethers (a small piece of VELCRO Brand fastener) to both sides of the guard, securing them firmly and evenly on either side. Then attach one side of each tether to each strap on the helmet using one half and hook of a hook & loop hook & loop fastener, pushing down & out with moderate pressure on both sides for a secure fit.

With these simple steps, you will be able to safely attach an accurately molded Shock Doctor Mouthguard that offers ultimate protection from dental injury during competition or recreation play!

How To Tether A Shock Doctor Mouthguard?

When looking to protect your teeth, a Shock Doctor mouthguard is an ideal choice. Not only are they comfortable and secure, but they also provide superior protection and can be easily tethered to a face mask or helmet. To ensure that your mouthguard stays in place during vigorous activity, it is important to tether it securely and correctly. Below is a step-by-step guide on how to tether a Shock Doctor Mouthguard:

Mouthguards Types

Before you begin to tether the Shock Doctor mouthguard, it is important to first understand the different types of mouthguards available. The three main types of Shock Doctor mouthguards are the Gel Max, Ultra and Pro series. Each one offers different levels of protection for different sports activities or levels of intensity.

Required Materials

To successfully tether your Shock Doctor Mouthguard, you will need the following materials: the mouthguard itself, a strap kit (which usually comes with the guard), two mirror clips (to clip onto either side of the guard) and two pieces of elastic or Velcro straps (to attach to either side of the guard).

Steps For Tethering a Shock Doctor Mouthguard

Once you have gathered all of your required materials, you can begin tethering your Shock Doctor Mouthguard:

Preparing The Strap And Mouthguard

First, begin by preparing the strap kit that came with your mouthguard. This typically includes two separate straps that must be threaded through each end of the clip that attaches to either side of the guard. Once this is done, then attach them securely around either side of the guard so that they are ready for use later on.

Attaching The Strap To The Mouthguard

Once you have prepared both straps for use, snap them into place on either side of the guard so that they are securely fastened around it. Depending on which type of Shock Doctor Mouthguard you have chosen, there may be additional straps included in order to ensure a snug fit against your face when in use.

Applying The Straps Effectively

Now that you have attached both straps securely around each side of the guard, it’s time to apply them effectively so that they keep your mouthpiece in place during activity:

Loosening The Straps

To ensure optimal comfort when wearing your Shock Doctor Mouthguard during activity, it’s important to loosen both straps slightly before putting it on – this will help make sure it doesn’t feel too tight against your face once worn. After loosening both straps slightly by hand or using pliers if necessary, adjust them as needed until they feel comfortable against your skin when in place.

Secure Mirror Positioning

When wearing your Shock Doctor Mouthguard during activity, it’s important to make sure that both straps are positioned correctly over each mirror clip so that they don’t slip down while in use – this will ensure maximum protection and stability while playing contact sports such as hockey or football. If necessary, adjust their positioning as needed until they fit snugly over each mirror clip without slipping down during playtime.

Cleaning The Shock Doctor Mouthguard

It’s important to remember to clean your Shock Doctor Mouthguard after every time you wear it – this will help remove any bacteria or germs from its surface and keep it hygienic for future use:

Removing Bacteria And Germs
Before cleaning your Shock Doctor Mouthguard with water and soap or specialized cleaning solutions designed for sporting gear such as those by Steripod or GuardLab, start by removing any visible bacteria or germs from its surface with an anti-bacterial wipe – this will help keep bacteria from spreading onto other surfaces when cleaning takes place later on.

< h 3 > Washing And Drying The Guard
Once all visible bacteria has been removed from its surface with an anti-bacterial wipe, rinse off any remaining dirt with water before washing thoroughly with soap and warm water – this will help remove any excess dirt particles from its surface which may cause irritation if left behind after drying takes place later on. Afterwards air dry completely before storing away until next time – never leave wet as this can encourage bacterial growth inside its surface which can be harmful when used again later on..

< h 2 > Important Considerations When Using A Shock Doctor Mouthguard
Although wearing a shock doctor mouthgard provides superior protection while playing contact sports such as hockey or football , there are still some important factors which should be considered before using one :

< h 3 > Check For Wear Or Damage Regularly In order for a shock doctor mouthgard to provide optimal protection ,its important regularly inspect its surface for signs wear , tear or damage . If any signs appear , replace immediately .

< h 3 > Wear A Helmet With Your MouthGuard When Appropriate Although wearing a shock doctor mouthgard provides superior protection while playing contact sports such as hockey or football ,its still important wear appropriate headgear when appropriate .

What Is Tethering?

Tethering is the process of attaching a mouthguard to a protective helmet. It is designed to keep the mouthguard in place and prevent it from slipping out of the wearers mouth. This can help prevent injuries to the teeth and gums, as well as protect against concussions and other head injuries.

Why Use A Shock Doctor Mouthguard?

Shock Doctor mouthguards are designed to provide superior protection for athletes of all levels. They feature a patented internal shock absorber that helps disperse impact away from the teeth and jaw, while also providing cushioning for the head and face. The Shock Doctor also comes with a detachable tether that can be used to secure it in place when playing contact sports, such as football or lacrosse.

How To Tether A Shock Doctor Mouthguard?

Tethering your Shock Doctor Mouthguard is easy and can help protect your teeth and jaw from injury. Here are some simple steps to properly tether your Shock Doctor Mouthguard:

• Step 1: Locate the tether attached to your Shock Doctor Mouthguard. It should be located on either side of the guard.
• Step 2: Securely attach one end of the tether to your helmet, making sure it is secured tightly.
• Step 3: Attach the other end of the tether to your Shock Doctor Mouthguard.
• Step 4: Check that both ends are securely attached and adjust if necessary.
• Step 5:

  .

.

Once you have completed these steps, you should be ready to safely use your Shock Doctor Mouthguard with its new tether attachment. Be sure to check it before each game or practice session for wear-and-tear damage or any loose connections that need tightening!

FAQ & Answers

Q: What types of mouthguards are there?
A: There are three main types of mouthguards available: stock, boil-and-bite, and custom. Stock mouthguards are pre-formed and ready to use, while boil-and-bite guards can be molded to fit your teeth using hot water. Custom mouthguards are made by a dentist based on an exact impression of your teeth.

Q: What materials do I need to tether a Shock Doctor Mouthguard?
A: To tether a Shock Doctor Mouthguard, you will need the following items: the mouthguard itself, a pair of scissors, and one or two elastic straps.

Q: How do I attach the strap to the Shock Doctor Mouthguard?
A: First, cut the elastic straps to the desired length. Then, thread one end of each strap through the holes in either side of the mouthguard. Finally, tie each end of the straps together tightly for a secure fit.

Q: How can I ensure that I am applying the straps effectively?
A: To ensure that you are applying the straps effectively, you should make sure that they are not too tight or too loose. You should also check that your mirror positioning is secure when wearing your Shock Doctor Mouthguard.

Q: How do I clean my Shock Doctor Mouthguard?
A: To clean your Shock Doctor Mouthguard, first remove any bacteria and germs by brushing it with a toothbrush and toothpaste. Then rinse it with warm water before washing it in dish detergent and warm water. Finally, dry it thoroughly before storing it in its protective case.

Tethering a Shock Doctor Mouthguard is a simple process that requires minimal effort. By using the included tether and following the instructions, you can easily secure your mouthguard in place to ensure it stays in place during physical activity or contact sports. It is important to remember to rinse and clean your mouthguard after every use, as this will help to keep it in optimal condition. With proper care, a Shock Doctor Mouthguard can provide reliable protection for any athlete.